Home » Forklifts » Komatsu Forklifts » Komatsu FSV13SH-1 Forklift

Komatsu FSV13SH-1 Forklift

Contents
  1. Dimensions
  2. Mast
  3. Engine Details
  4. Operational Specs

Dimensions

Length To Fork Face 9.52 ft in (2900 mm)
Overall Width 4.4 ft in (1340 mm)
Overall Height – Mast Lowered 6.93 ft in (2110 mm)
Wheelbase 4.65 ft in (1415 mm)
Ground Clearance 3.94 in (100 mm)
Height To Top Of Overhead Guard 6.93 ft in (2110 mm)
Max Fork Height 11.11 ft in (3385 mm)
Turning Radius 5.52 ft in (1680 mm)

Mast

Mast Tip Forward 3 degrees
Mast Tip Rear 5 degrees
Number Of Mast Sections 3
Lower Speed 90 ft/min (27.44 m/min)
Load Center 23.63 in (600 mm)
Load Capacity 2500 lb (1133.99 kg)
Lift Speed 65 ft/min (19.82 m/min)

Engine Details

Fuel Type Electric 36V

Operational Specs

Operating Weight 13300 lb (6032.8 kg)
Tire Type Cushion Solid
Number Of Front Wheels 4
Number Of Rear Wheels 2
Max Speed 7 mph (11.3 km/h)
Ask a question

You may also like
Case IH Transmission Error Codes
CNH Industrial 0
New Holland & Case IH Transmission Error Codes (DTC Codes)
In the world of agriculture, where fields are vast and the power of tractors
John Deere X495 Front End Loader attachment
John Deere 0
John Deere X495 Attachments (Specs)
The John Deere X495 Lawn Tractor stands as a reliable workhorse in the realm
John Deere 1830 Air Drill Specs
John Deere 0
John Deere 1830 Air Hoe Drill
The John Deere 1830 Air Hoe Drill is a versatile and durable seeding implement
Kubota V1505 Engine Serial Number Decode
Serial Numbers 1
Where to Find Kubota Engine Serial Number & How to Decode?
Kubota engine serial numbers are unique identifiers that provide important information about each unit.
John Deere 2210 Compact Utility Tractor Attachment List
John Deere 0
John Deere 2210 Attachments (Specs)
John Deere 2210 Attachment List with Specs Attachments for the John Deere 2210 can
American Wire Gauge (AWG) Size Chart
Guides 2
Wire Gauge Size Charts: AWG (American Wire Gauge), SWG (British Standard), IEC 60228
Wire gauge charts provide a reference for determining the diameter or thickness of wires,