Home » Forklifts » Hyster Forklifts » Hyster A25XNT Forklift

Hyster A25XNT Forklift

Contents
  1. Dimensions
  2. Mast
  3. Engine Details
  4. Operational Specs

Dimensions

Length To Fork Face 5.66 ft in (1724 mm)
Overall Width 3.27 ft in (996 mm)
Overall Height – Mast Lowered 6.5 ft in (1980 mm)
Wheelbase 3.84 ft in (1168 mm)
Ground Clearance 3.47 in (88 mm)
Height To Top Of Overhead Guard 6.76 ft in (2060 mm)
Front Tread Range 32.92 in (836 mm)
Gradeability 22.4 %
Rear Tread Range 35.28 in (896 mm)
Right Angle Stack 10.11 ft in (3079 mm)
Turning Radius 4.77 ft in (1452 mm)

Mast

Mast Tip Forward 5 degrees
Mast Tip Rear 5 degrees
Load Capacity 2500.05 lb (1134 kg)
Max Fork Spread 112.6 in (2860 mm)
Lower Speed 91 ft/min (27.74 m/min)
Lift Speed 101 ft/min (30.79 m/min)
Load Center 24.02 in (610 mm)

Engine Details

Engine Make Hyster
Engine Model A25XNT

Operational Specs

Operating Weight 4559 lb (2068 kg)
Tire Type Pneumatic Shaped Solid
Number Of Front Wheels 2
Number Of Rear Wheels 2
Max Speed 7.8 mph (12.5 km/h)
Drawbar Pull 1403 lb (636.4 kg)
Front Tire Size 18 x 7-8
Rear Tire Size 18 x 7-8
Axle Load – Front 2702 lb (1225.7 kg)
Axle Load – Rear 3394 lb (1539.5 kg)
Ask a question

You may also like
John Deere Tractor PIN Locations
Serial Numbers 36
John Deere PIN Decoder – Where is the Serial Number Plate & How to Identify?
The Product Identification Number (PIN) / Serial Number plate on John Deere equipment contains
John Deere ACU Error Code 524103.04
John Deere 0
John Deere ACU Error Codes / Armrest Controller Unit Fault DTCs 000158.04 – 524254.31
John Deere Armrest Controller Unit (ACU) Error Codes, also known as Diagnostic Trouble Codes
Bobcat Toolcat Error Codes for Utility Work Machines
Bobcat 1
Bobcat Toolcat Error Codes (Service Code List for 5600, 5610, UW53, UW56 Utility Work Machines)
The Bobcat Toolcat is a versatile piece of machinery known for its reliability and
Massey Ferguson DTC Codes List
Massey Ferguson 0
Massey Ferguson DTC Codes List: 04.02.E6 – 06.X.1A
Massey Ferguson Diagnostic Trouble Codes (DTC) are alphanumeric codes generated by the onboard diagnostic
44-inch Snowblower for Deere S100 Series Troubleshooting
John Deere 0
44-inch Snow Blower for John Deere S100 and S200 Series Lawn Tractors
Key Features Type Front-mount Stage Two-Stage Lift Height 4 in (102 mm) Lift Height
Case IH Front Suspension Errors
CNH Industrial 3
New Holland & Case IH Front Suspension Errors
Modern tractors, such as those from New Holland and Case IH, come equipped with