Home » Forklifts » Clark Forklifts » Clark ESM II12 Forklift

Clark ESM II12 Forklift

Contents
  1. Dimensions
  2. Mast
  3. Engine Details
  4. Operational Specs

Dimensions

Length To Fork Face 5.22 ft in (1590 mm)
Overall Width 3.36 ft in (1024 mm)
Overall Height – Mast Lowered 6.92 ft in (2108 mm)
Wheelbase 3.59 ft in (1092 mm)
Ground Clearance 2.41 in (61 mm)
Height To Top Of Overhead Guard 7.21 ft in (2197.61 mm)
Max Fork Height 15.67 ft in (4775 mm)
Right Angle Stack 5.38 ft in (1638 mm)
Turning Radius 4.31 ft in (1311 mm)

Mast

Mast Tip Forward 3 degrees
Mast Tip Rear 5 degrees
Number Of Mast Sections 3
Lower Speed 80 ft/min (24.39 m/min)
Max Fork Spread 36 in (914.4 mm)
Load Center 19.69 in (500 mm)
Load Capacity 2755.78 lb (1250 kg)
Lift Speed 63 ft/min (19.21 m/min)

Engine Details

Fuel Type Electric Motor 36 V

Operational Specs

Operating Weight 8426 lb (3822 kg)
Tire Type cushion
Number Of Front Wheels 2
Number Of Rear Wheels 1 dual
Max Speed 7.6 mph (12.1 km/h)
Ask a question

You may also like
Dozer Size Chart to Choose the Right Bulldozer for Your Job
Guides 1
Dozer Size Chart to Choose the Right Bulldozer for Your Job
Please note that the specifications and categorizations may vary among different manufacturers and models.
Kubota Tractor Serial Number Location
Serial Numbers 0
Kubota Tractor Serial Number Location: Where to Find a PIN?
Kubota Tractor Serial Number is crucial for maintenance, ordering parts, and verifying the model
Massey Ferguson Error 0A.41.FF Connection problem on a hydraulic valve
Massey Ferguson 2
Massey Ferguson Diagnostic Trouble Codes List: 06.X.1B – 0B.X.24
Massey Ferguson Diagnostic Trouble Codes are alphanumeric codes generated by the tractor’s onboard diagnostic
John Deere 1835 Air Hoe Drill Specs
John Deere 0
John Deere 1835 Air Drill
The John Deere 1835 Air Hoe Drill is a high-performance seeding solution designed to
John Deere Engine with EPA Tier 4 Final and EU Stage IV Emission Standards
Guides 8
Vehicle Emissions Standards – US EPA Tier, EU Stage (On-Road / Non-Road)
To reduce the environmental and health impacts of diesel engines used in vehicles and
Deere Wheel Loader with OPG (Operator Protective Guards)
Guides 4
What is ROPS, FOPS, FOG, OHG & OPG? Cab OPS (Operator Protective Structures)
ROPS, FOPS, FOG, OHG & OPG are Operator Protective Structures (OPS) designed to protect