Contents
Blades
| A-Blade Capacity | 5.08 yd3 (3.89 m3) |
| A-Blade Width | 14.77 ft in (4.51 m) |
| Lgp S-Blade Capacity | 7.7 yd3 (5.89 m3) |
| Lgp S-Blade Width | 14.91 ft in (4.55 m) |
| S-Blade Capacity | 6.75 yd3 (5.17 m3) |
| S-Blade Width | 12.81 ft in (3.91 m) |
| Su – Blade Capacity | 8.98 yd3 (6.87 m3) |
| Su – Blade Width | 12.12 ft in (3.7 m) |
| U-Blade Capacity | 10.91 yd3 (8.35 m3) |
| U-Blade Width | 13.08 ft in (3.99 m) |
Dimensions
| Ground Clearance | 1.37 ft in (416.56 mm) |
| Track Gauge | 6.5 ft in (1980.95 mm) |
| Overall Length – Basic Tractor – With Drawbar | 15.54 ft in (4.74 m) |
| Height – ROPS/Canopy | 11.06 ft in (3.38 m) |
| Drawbar Height (Center Of Clevis) From Ground Face Of Shoes | 24.96 in (633.99 mm) |
| Width – Without Blade | 9.5 in (241.3 mm) |
| Height | 11 ft in (3352.8 mm) |
| Width – With Blade | 114 in (2895.6 mm) |
| Length – Track On Ground | 113.31 in (2878.08 mm) |
Undercarriage
| Track Gauge | 6.5 ft in (1981.2 mm) |
| Ground Clearance | 1.36 ft in (414.02 mm) |
| Track On Ground – Lgp | 124.68 in (3166.88 mm) |
| Track Rollers/Side | 7 |
| Carrier Rollers/Side | 1 |
| Ground Contact Area | 4991 in |
| Ground Contact Area – Lgp | 8974.52 in2 (5.8 m2) |
| Ground Pressure | 11 psi (75.85 kPa) |
| Grouser Height | 3 in (76.2 mm) |
| Ground Pressure – Lgp | 6.6 psi |
| Track Rollers/Side – Lgp | 7 |
| Pitch | 8.5 in (215.9 mm) |
| Width – Shoe | 22 in (558.8 mm) |
| Shoe Type | Extreme Service |
| Shoes/Side | 40 |
| Shoes/Side – Lgp | 43 |
| Width – Shoe – Lgp | 36 in (914.4 mm) |
| Width – Shoe – Optional | 24 in (609.6 mm) |
| Track Gauge – Lgp | 87.99 in (2234.95 mm) |
| Track On Ground | 9.4 in (238.76 mm) |
Ripper
| Beam Cross Section | 343 x 279 mm 13.5 x 11 in |
| Number Of Pockets | 3 |
| Ripper Type | Adjustable Parallelogram |
| Overall Beam Width | 87 in (2209.8 mm) |
| Weight – Each Additional Shank | 330 lb (149.7 kg) |
| Maximum Penetration | 29.4 in (746.8 mm) |
| Maximum Clearance Raised – Under Tip, Pinned In Bottom Hole | 29.8 in (757 mm) |
| Pry-Out Force | 38513 lb (17469.3 kg) |
| Weight – With One Shank | 7431 lb (3370.7 kg) |
| Maximum Penetration Force | 19100 lb (8663.7 kg) |
Engine Details
| Gross Power | 258 hp (192.4 kw) |
| Displacement | 629 cu in (10.4 L) |
| Bore | 4.9 in (124.5 mm) |
| Stroke | 5.5 in (139.7 mm) |
| Net Power – Iso 9249 | 240 hp (179 kw) |
| Net Power – Sae J1349 | 238 hp (177.5 kw) |
| Engine Model | Cat 3176C |
| Flywheel Power | 240 hp (179 kw) |
| Gross Power – Iso 14396 | 253 hp (188.7 kw) |
| Net Power – Din 70020 | 248 PS |
| Net Power – Caterpillar | 240 hp (179 kw) |
| Maximum Flywheel Power | 258 hp (192.4 kw) |
| Net Power – Eu 80/1269 | 240 hp (179 kw) |
Operational Specs
| Operating Weight | 55786 lb (25304.2 kg) |
Transmission
| 1.0 Forward | 2.2 mph (3.6 km/h) |
| 2.0 Forward | 3.8 mph (6.1 km/h) |
| 3.0 Forward | 6.6 mph (10.6 km/h) |
| 1.0 Reverse | 2.9 mph (4.6 km/h) |
| 2.0 Reverse | 4.9 mph (7.9 km/h) |
| 3.0 Reverse | 8.5 mph (13.6 km/h) |
Weights
| Shipping Weight | 45479 lb (20629 kg) |
| Operating Weight – Lgp | 60503 lb (27443.8 kg) |
| Shipping Weight – Lgp | 50094 lb (22722.3 kg) |
| Operating Weight – Xr | 57056 lb (25880.2 kg) |
| Shipping Weight – Xr | 46752 lb (21206.4 kg) |
Service Refill Capacities
| Cooling System | 20.4 gal (77.3 L) |
| Fuel Tank Capacity | 126.5 gal (478.9 L) |
| Final Drive – Each | 3.4 gal (12.9 L) |
| Engine Crankcase | 8.2 gal (31.1 L) |
| Power Train | 47 gal (178 L) |
| Pivot Shaft Compartment | 0.5 gal (1.9 L) |
| Roller Frames – Each | 6.5 gal (24.7 L) |
| Attachment Hydraulic System Tank Only | 14.3 gal (54.2 L) |
Hydraulic Controls – Main Relief Valve
| Pressure Setting – Differential Steering Models | 6092 psi |
Hydraulic Controls – Maximum Operating Pressure
| Bulldozer | 3307 psi |
| Tilt Cylinder | 2498 psi |
| Ripper – Pitch | 3300 psi |
| Ripper – Lift | 3300 psi |
| Steering | 5511 psi |
Hydraulic Controls – Pump
| Lift Cylinder Flow | 47.6 gal/min |
| Ripper Cylinder Flow | 47.6 gal/min |
| Tilt Cylinder Flow | 21.1 gal/min |
| Pump Capacity | 1015 psi |
| Rpm At Rated Engine Speed | 2231 rpm |
| Pump Output – Differential Steering | 77.9 gal/min |
Winch
| Flange Diameter | 24 in (609.6 mm) |
| Oil Capacity | 4 gal (15.2 L) |
| Winch Model | PA110VS Variable Speed |
| Winch And Bracket Length | 57.5 in (1460.5 mm) |
| Drum Diameter | 12.5 in (317.5 mm) |
| Drum Width | 13.3 in (337.9 mm) |
| Winch Case – Width | 46.1 in (1171 mm) |
| Weight* | 4176 lb (1894.3 kg) |
| Increased Tractor Length – Std | 29.2 in (741.7 mm) |
| Increased Tractor Length – Lgp | 29.2 in (741.7 mm) |
| Drum Capacity – 29 Mm (1.13 In) | 276 ft in (84.2 m) |
| Ferrule Size (O.D. Length) | 2.38 in x 2.56 in / 60 mm x 65 mm |
| Increased Tractor Length – Xr | 23.1 in (586.8 mm) |
| Drum Capacity – 24 Mm (1 In) | 418 ft in (127.5 m) |
| Drum Capacity – 32 Mm (1.25 In) | 193 ft in (58.9 m) |
