Contents
Dimensions
| Width Over Tracks | 6 ft in (1828 mm) |
| Height To Top Of Cab | 8.66 ft in (2639 mm) |
| Length Of Track On Ground | 84 ft in (25603.2 mm) |
| Ground Clearance | 1.21 ft in (366 mm) |
| Height To Top Of ROPS | 103.9 in (2639 mm) |
| Blade Lift Above Ground | 33.59 in (853 mm) |
| Cast Reach | 11.19 in (284 mm) |
| Blade Depth Below Ground | 20.91 in (531 mm) |
Undercarriage
| Number Of Upper Rollers | 1 |
| Width Of Shoes | 27.01 in (686 mm) |
| Number Of Bottom Rollers Per Side | 6 |
Electrical System
| Alternator | 90 amp |
| Battery | 12-volt low-maintenance |
Engine Details
| Fuel | 2 Diesel |
| Emission Standards | Tier3 |
| Fan | 20 in,(500 mm)Diameter |
| Pump Operating Angles -Side-To-Side | 45 degrees |
| Pump Operating Angles – Fore And Aft | 45 degrees |
| Transmission Type | Hydrostatic |
| Fuel Tank Capacity | 41 gal (155 L) |
| Engine Model | Case 445TA/EG7a |
| Gross Power | 80.5 hp (60.1 kw) |
| Net Power | 74 hp (55.2 kw) |
| Power Measured @ | 2000 rpm |
| Displacement | 274.7 cu in (4.5 L) |
Drive Train
| Max Drawbar Pull | 36081.9 lb (160.5 kN) |
| Parking Brakes | Heavy-duty, spring-applied, |
| Final Drive | 2 helical gear |
Capacities
| Engine Oil With Filter | 3.3 gal (12.3 L) |
Operational Specs
| Long Track | 16248 lb (7370 kg) |
| Wide Track | 16797 lb (7619 kg) |
| Low Ground Pressure | 17546.6 lb (7959 kg) |
| Winch | 1000.9 lb (454 kg) |
| Center Rock Guard | 339.6 lb (154 kg) |
| Sweeps | 110 lb (50 kg) |
| Operating Weight | 17546.6 lb (7959 kg) |
Performance
| Pump Flow | 20.3 gal/min (76.9 L/min) |
Transmission
| Max Speed – Forward | 5.5 mph (8.9 km/h) |
| Max Speed – Reverse | 5.5 mph (8.9 km/h) |
Hydraulic
| Lift Cylinder(S) | 2 |
| Lift Cylinder-Bore Diameter | 3.6 in (89 mm) |
| Lift Cylinder – Rod Diameter | 1.8 in (44.5 mm) |
| Lift Cylinder – Stroke | 15.6 in (394 mm) |
Blade
| Blade Width | 10 ft in (3048 mm) |
| Blade Capacity | 2.2 yd3 (1.7 m3) |
| Blade Height | 33.2 in (841 mm) |
| Blade Type | PAT |
Hydraulic System
| Pump Type | Variable Displacement Piston |
| Pump Flow Capacity | 20.9 gal/min (78.8 L/min) |
Standard Blade
| Blade Angle (Both Directions) | 25 degrees |
