Contents
Engine Details
| Net Power | 409 hp (305 kw) |
| Rated Speed | 1800 rpm |
| Displacement | 927 cu in (15.2 L) |
| Torque Rise | 37 % |
| Bore | 5.4 in (137.2 mm) |
| Stroke | 6.8 in (171.5 mm) |
| Net Power – Sae J1349 | 409 hp (305 kw) |
| Gross Power – Sae J1995 | 449 hp (334.9 kw) |
| Engine Model | Cat C15 ACERT |
| Gross Power – Iso 14396 | 441 hp (328.9 kw) |
| Peak Torque – 1,200 Rpm | 1711 lb ft (2319.9 Nm) |
Operational Specs
| Operating Weight | 96379 lb (43716.8 kg) |
Transmission
| Transmission Type | Cat planetary power shift |
| Forward – 1 | 5 mph (8.1 km/h) |
| Forward – 2 | 8 mph (12.9 km/h) |
| Reverse – 1 | 5 mph (8.1 km/h) |
| Reverse – 2 | 8 mph (12.9 km/h) |
| Direct Drive – Forward 3 | 14 mph (22.6 km/h) |
| Direct Drive – Reverse 3 | 16 mph (25.8 km/h) |
| Direct Drive – Forward 4 | 24 mph (38.7 km/h) |
| Direct Drive – Forward 2 | 8 mph (12.9 km/h) |
| Direct Drive – Reverse 2 | 9 mph (14.5 km/h) |
Buckets
| Bucket Capacities | 5-10.3 m3 (6.5-13.5 yd3) |
Axles
| Front | Fixed |
| Rear | Trunnion |
| Oscillation Angle | 12.5 degrees |
Brakes
| Brakes | SAE J1473 OCT90, ISO 3450:1992 |
Operating Specifications
| Bucket Capacity Range | 5-10.3 m3 (6.5-13.5 yd3) |
| Cat Truck Match – Standard | 770 |
| Cat Truck Match – High Lift | 772 |
| Rated Payload – Quarry Face | 24250.9 lb (11000 kg) |
| Rated Payload – Loose Material (Standard) | 30864.7 lb (14000 kg) |
| Rated Payload – Loose Material (High Lift) | 26676 lb (12100 kg) |
Service Refill Capacities
| Fuel Tank Capacity | 159 gal (601.9 L) |
| Crankcase | 9 gal (34.1 L) |
| Transmission | 20 gal (75.8 L) |
| Differential – Final Drives – Front | 49 gal (185.5 L) |
| Differential – Final Drives – Rear | 45 gal (170.4 L) |
| Hydraulic System Factory Fill | 87 gal (329.4 L) |
| Hydraulic System – Tank Only | 33 gal (125 L) |
| Cooling Systems | 24 gal (90.9 L) |
| Axle Oil | 94 gal (355.9 L) |
Hydraulic Cycle Times
| Raise | 9 s |
| Dump | 3.5 s |
| Lower Float Down | 4.3 s |
| Rack Back | 4.5 s |
| Lower | 5.2 s |
| Total Hydraulic Cycle Time | 21.3 s |
Hydraulic System – Lift/Tilt
| Lift/Tilt System – Circuit | Load Sense |
| Lift/Tilt System – Pump | 2 110 cc variable displacement |
| Relief Valve Setting – Lift/Tilt | 4050 psi |
| Maximum Flow At 2,165 Rpm | 123 gal/min |
| Tilt Cylinder – Stroke | 28.4 in (721.4 mm) |
| Lift Cylinder – Bore | 7.5 in (190.5 mm) |
| Lift Cylinder – Stroke | 45 in (1143 mm) |
| Tilt Cylinder – Bore | 6.7 in (170.2 mm) |
Hydraulic System – Steering
| Steering System – Circuit | Load Sense |
| Steering System – Pump | Piston, variable displacement |
| Steering Cut Off Pressure | 4000 psi |
| Total Steering Angle | 70 degrees |
| Maximum Flow At 2,284 Rpm | 52 gal/min |
