Contents
Dimensions
| Ground Clearance | 1.43 ft in (435.87 mm) |
| Bucket Pin Height – Maximum Lift | 12.33 ft in (3.76 m) |
| Carry Height | 1.43 ft in (0.44 m) |
| Centerline Of Front Axle To Hitch | 4.59 ft in (1.4 m) |
| Digging Depth | 1.65 in (41.91 mm) |
| Dump Clearance At Maximum Lift – 45 Degrees | 9.28 ft in (2.83 m) |
| Height – Center Of Axle | 2.27 ft in (0.7 m) |
| Height – Top Of Exhaust Stack | 10.53 ft in (3.21 m) |
| Height – Top Of Hood | 87.36 in (2218.95 mm) |
| Height – Top Of ROPS/FOPS | 10.59 ft in (3.23 m) |
| Length – Rear Axle To Bumper | 6.44 ft in (1.97 m) |
| Overall Height – Bucket Raised | 15.78 ft in (4.81 m) |
| Overall Length | 22.63 ft in (6897.63 mm) |
| Reach At Maximum Lift And 45 Degrees Dump | 2.6 ft in (0.8 m) |
| Bucket Clearance-Maximum Lift/Carry | 11.26 ft in (3.44 m) |
| Wheel Base | 9.19 ft in (2.81 m) |
Engine Details
| Displacement | 403 cu in (6.7 L) |
| Net Torque | 482 lb ft (653.6 Nm) |
| Peak Torque | 496 lb ft (672.5 Nm) |
| Bore | 4.2 in (105 mm) |
| Stroke | 5 in (127 mm) |
| Rated Net Power | 128 hp (95.5 kw) |
| Sae J1349 (2) | 138 hp (103 kw) |
| Iso 9249 (1997) (2) | 139 hp (103.7 kw) |
| Eec 80/1269 (2) | 139 hp (103.7 kw) |
| Sae J1349 (1) | 128 hp (95.5 kw) |
| Iso 9249 (1997) (1) | 130 hp (97 kw) |
| Eec 80/1269 (1) | 130 hp (97 kw) |
| Maximum Net Power – 1800 Rpm | 138 hp (103 kw) |
Operational Specs
| Operating Weight | 24180 lb (10967.9 kg) |
Steering
| Steering Angle – Each Direction | 40 degrees |
| Minimum Turning Radius – Over Tires | 200 in (5080 mm) |
| Steering Cylinder, Two, Bore | 2.8 in (69.9 mm) |
| Hydraulic Output At 2300 Engine Rpm And 6900 Kpa (1000 Psi) | 27 gal/min |
| Maximum Working Pressure | 3000 psi |
Transmission
| Forward – 1 (1) | 4.2 mph (6.8 km/h) |
| Reverse – 1 (1) | 4.2 mph (6.8 km/h) |
| Forward – 1 (2) | 2.3 mph (3.8 km/h) |
| 2 (2) | 4.7 mph (7.6 km/h) |
| 3 (2) | 12.2 mph (19.7 km/h) |
| 4 (2) | 24.2 mph (39 km/h) |
| Reverse – 1 (2) | 2.5 mph (4.1 km/h) |
| 2 (3) | 5 mph (8.1 km/h) |
| 3 (3) | 13.2 mph (21.3 km/h) |
| 2 (1) | 7.6 mph (12.3 km/h) |
| 3 (1) | 13.5 mph (21.8 km/h) |
| 4 (1) | 23.9 mph (38.5 km/h) |
Steering
| Steering Articulation | 40 degrees |
Transmission
| Standard Transmission Maximum Travel Speeds | 23.9 mph (38.5 km/h) |
| Optional Low Speed Transmission Maximum Travel Speeds | 24.2 mph (39 km/h) |
Tires
| Tread Width | 6.2 ft in (1.9 m) |
| Size | 20.5 R25 Radial (L-3) |
Buckets
| Bucket Capacities | 1.7 m3 – 2.1 m3 2.2 yd3 – 2.7 yd3 |
Operating Specifications
| Static Tipping Load – Full Turn | 16844 lb (7640.4 kg) |
| Articulation Angle | 40 degrees |
| Reach – Full Lift And 45 Degrees Dump | 2.6 ft in (0.8 m) |
| Dump Clearance At Full Lift And 45 Degrees Dump Angle | 9.3 ft in (2.9 m) |
Service Refill Capacities
| Cooling System | 8.5 gal (32.2 L) |
| Fuel Tank Capacity | 59.4 gal (224.9 L) |
| Crankcase | 4.4 gal (16.7 L) |
| Hydraulic Tank | 18.5 gal (70.1 L) |
| Hydraulic System – Including Tank | 33 gal (125 L) |
| Transmission | 6.1 gal (23.1 L) |
| Front | 5.5 gal (20.9 L) |
| Rear | 5.5 gal (20.9 L) |
Cab
| ROPS | SAE J1040 MAY94, ISO 3471-1994 |
| FOPS | SAE J231 JAN81, ISO 3449-1992 Level II |
Loader Hydraulic System
| Pump Flow – Implement Pump | 40.15 gal/min |
| Output At 2,300 Engine Rpm And 6900 Kpa (1000 Psi) With Sae 10w Oil At 65 Degreesc (150 Degreesf) | 39.5 gal/min |
| Maximum Working Pressure | 3755 psi |
| Raise | 5.2 s |
| Dump | 1.1 s |
| Lower, Empty, Float Down | 2.7 s |
| Total | 9 s |
| Bore (1) | 4.3 in (108 mm) |
| Stroke (1) | 29.7 in (754.4 mm) |
| Bore (2) | 4.8 in (120.7 mm) |
| Stroke (2) | 20.5 in (520.7 mm) |
| Hydraulic Cycle Time | 9 Seconds |
| Relief Pressure – Implement Pump | 3755 psi |
