Contents
Dimensions
| Kubota L4701 | 2WD | 4WD |
|---|---|---|
| Overall Length (w/o 3p) | 122.8 in (3120 mm) | 119.5 in (3035 mm) |
| Wheelbase | 72.8 in (1850 mm) | 72.8 in (1850 mm) |
| Overall Width (min tread) | 62.4 in (1585 mm) | 62.4 in (1585 mm) |
| Overall Height (w/ ROPS) | 91.7 in (2330 mm) | 91.7 in (2330 mm) |
| Ground Clearance | 15.2 in (385 mm) | 15.2 in (385 mm) |
| Min Turning Radius (w/ brake) | 106.3 in (2700 mm) | 102.4 in (2600 mm) |
| Front Tread | 50.4 in (1280 mm) 54.3 in (1380 mm) 58.3 in (1480 mm) 62.2 in (1580 mm) |
45.5 in (1155 mm) |
| Rear Tread | 46.5 in (1180 mm) 47.2 in (1200 mm) 51.2 in (1300 mm) 57.1 in (1450 mm) 60.8 in (1545 mm) |
46.5 in (1180 mm) 47.2 in (1200 mm) 51.2 in (1300 mm) 57.1 in (1450 mm) 60.8 in (1545 mm) |
Tire Size
| Front Tire Sizes | Inflation Pressure |
|---|---|
| 7.5L-15, 6PR (Standard for 2WD) | 32 psi (220 kPa) |
| 8.3-16, 6PR (Standard for 4WD) | 22 psi (150 kPa) |
| 6.00-16, 4PR | 32 psi (220 kPa) |
| 27 x 8.50-15, 4PR | 11 psi (80 kPa) |
| 10-16.5, 6PR | 20 psi (140 kPa) |
| 27-10.50LL15, 4PR | 11 psi (80 kPa) |
| 305R343 | 20 psi (140 kPa) |
| Rear Tire Sizes | Inflation Pressure |
| 14.9-24, 6PR (Standard) | 20 psi (140 kPa) |
| 44 x 18-20, 4PR | 20 psi (140 kPa) |
| 17.5L-24, 6PR | 20 psi (140 kPa) |
Weight
| Operating Weight (2WD, Manual) | 3219 lb (1460 kg) |
| Operating Weight (4WD, Manual) | 3296 lb (1495 kg) |
| Operating Weight (4WD, HST) | 3307 lb (1500 kg) |
Engine Details
| Number of Cylinders | 4 |
| Engine Make | Kubota |
| Engine Model | Kubota V2403-CR-E4 |
| Displacement | 148.5 cu in (2.434 L) |
| Bore | 3.43 in (87 mm) |
| Stroke | 4.03 in (102.4 mm) |
| Net Horsepower | 44.8 hp (33.4 kw) |
| PTO Power (Manual) | 39.3 hp (29.3 kw) |
| PTO Power (HST) | 37.8 hp (28.2 kw) |
| Power Measured @ | 2600 rpm |
| Peak Torque | 107.8 lb ft (146.2 Nm) |
| Torque Measured @ | 1600 rpm |
| Low Idle Speed | 800 rpm |
| Lubrication | Forced lubrication by trochoid pump |
| Oil Filter | Full flow paper filter (Cartridge type) |
| Cooling System | Pressurized radiator, forced circulation with water pump |
| Compression Ratio | 18.1:1 |
| Combustion System | Direct injection |
| Fuel System | Common rail system |
| Aspiration | Naturally aspirated |
| Aftertreatment | DOC + DPF |
| Emission Standards | US EPA Tier 4 Final + EU Stage V |
Electrical System
| Operating Voltage | 12 V |
| Alternator | 40 amps |
| Battery | 12V, CCA 600, RC: 120 min |
| Ground | Negative |
| Starter | 12 V, 3.4 hp (2.5 kw) |
| Working Lights | 2x headlights + 2x tail lights with hazard flashers and turn signals |
Operator Environment
| Operator Seat | Adjustable seat suspension |
| ROPS | Factory certified 2-post foldable ROPS with retractable seat belt |
| OPC | Operator presence control system, engine shutoff type |
| Dashboard | Instrument Panel features large gauges and a digital LCD panel that provide vital information including engine error codes and a parking brake indicator |
| Parking Brake | Depress the brake pedals. Latch the brake pedals with the parking brake lever |
| SMV sign | Slow moving vehicle sign |
Transmission
| Kubota L4701 | Manual (2WD/4WD) | HST (4WD) |
|---|---|---|
| Type | Gear shift with synchronized shuttle | Hydrostatic transmission |
| Clutch Type | Dry type single stage | No clutch |
| Number Of Gears | 8F / 8R | Infinite (3-range) |
| Max Forward Speed | 14.9 mph (24.0 km/h) | 15.8 mph (25.4 km/h) |
| Max Reverse Speed | 14.3 mph (23.0 km/h) | 14.2 mph (22.9 km/h) |
| Steering | Hydrostatic power steering | Hydrostatic power steering |
| Cruise Control | N/A | Mechanical lever, infinite speed control |
| Service Brakes | Mechanical, multi-plate wet-disc brakes | Mechanical, multi-plate wet-disc brakes |
PTO (Power Take-Off)
| Rear PTO Type | Live-independent hydraulic PTO |
| Rear PTO Speed | 540 rpm |
| PTO / Engine RPM (Manual transmission) | 540 @ 2475 |
| PTO / Engine RPM (HST transmission) | 540 @ 2640 |
| Rear PTO Shaft | 1 3/8″ SAE 6-Spline Shaft |
| PTO Clutch | Wet clutch |
Hydraulic System
| Type | Open center |
| Pump Type | Tandem pump gear type |
| Hydraulic Pump Flow | 7.8 gal/min (29.4 L/min) |
| Power Steering Pump Flow | 4.7 gal/min (17.9 L/min) |
| System Pressure | 2560 psi (17700 kPa) |
| Remote Valves | Double acting valve / Double acting valve with float position |
3-Point Hitch
| Lift Control Type | Position control |
| 3-Point Hitch Type | Category I |
| 3 Point Hitch Lift Capacity @ Ends | 2870 lb (1300 kg) |
| 3 Point Hitch Lift Capacity @ 24″ | 2320 lb (1053 kg) |
Drawbar
| Drawbar Type | Fixed / Swinging (optional) |
| Max Drawbar Load | 6600 lb (3000 kg) |
| Max Drawbar Load @ Hitch | 1430 lb (650 kg) |
Service Refill Capacities
| Fuel Tank Capacity | 13.5 gal (51 L) |
| Engine Oil Capacity (w/ filter) | 2.2 gal (8.2 L) |
| Cooling System Capacity | 1.7 gal (6.5 L) |
| Transmission Oil Capacity | 10.6 gal (40 L) |
| Front Axle (4WD Bevel Gear Cases) | 1.7 gal (6.5 L) |
Kubota L4701 Attachments
The Kubota L4701 compact tractor is a versatile, high-performance machine designed to handle a wide range of agricultural, landscaping, and construction tasks. To maximize productivity, Kubota offers a robust lineup of attachments engineered for seamless integration with the L4701, ensuring durability, efficiency, and ease of use.
Kubota LA765 Loader
| A. Maximum Lift Height (to bucket pivot pin) | 105.2 (2673) |
| B. Maximum Lift Height under Level Bucket | 95.7 (2431) |
| C. Clearance with Bucket Dumped | 81.2 (2063) |
| D. Reach at Maximum Lift Height (dumping reach) | 21.1 (537) |
| E. Maximum Dump angle | 41° |
| F. Reach with Bucket on Ground | 70.2 (1783) |
| G. Bucket Roll-back angle | 27° |
| H. Digging Depth | 6.1 (156) |
| I. Overall Height in Carry Position | 54.6 (1387) |
| U. Lift Capacity (bucket pivot pin, maximum height) | 1684 (764) |
| V. Lift Capacity (500 mm forward, maximum height) | 1263 (573) |
| W. Lift Capacity (bucket pivot pin, 1500 mm height) | 2154 (977) |
| X. Lift Capacity (1500 mm height) | 1726 (783) |
| Y. Breakout Force (bucket pivot pin) | 3153 (14.02 kN) |
| Z. Breakout Force (500 mm forward) | 2443 (10.87 kN) |
| VV. Bucket Roll-back Force at Maximum Height | 2869 (12763) |
| XX. Bucket Roll-back Force at 1500 mm | 3673 (16429) |
| ZZ. Bucket Roll-back Force at Ground level | 3000 (13345) |
| a. Bucket Length | 19.7 in (500 mm) |
| Raising Time (rated flow) | 4.0 sec |
| Lowering Time (rated flow) | 2.5 sec |
| Bucket Dumping Time (rated flow) | 1.6 sec |
| Bucket Roll-back Time (rated flow) | 2.5 sec |
Known for its heavy-duty lifting capacity, Kubota LA765 front loader delivers smooth, precise operation for loading, material handling, and general utility work. Its quick-attach system ensures rapid changes between buckets and other front-mounted implements, improving jobsite efficiency.
Kubota BH92 Backhoe
| A. Transport Height | 100.1 in (2542 mm) |
| B. Stabilizer Spread – Transport | 69.2 in (1758 mm) |
| C. Ground Clearance | 12.7 in (323 mm) |
| E. Overall Width | 71.3 in (1810 mm) |
| F. Maximum Digging Depth | 110.9 in (2816 mm) |
| G. Digging Depth, 2 ft. Flat Bottom | 109.8 in (2789 mm) |
| H. Digging Depth, 8 ft. Flat Bottom | 91.0 in (2312 mm) |
| J. Operating Height, Fully Raised | 148.6 in (3775 mm) |
| K. Loading Height | 84.3 in (2141 mm) |
| L. Loading Reach | 53.5 in (1360 mm) |
| M. Reach from Swing Pivot | 150.4 in (3819 mm) |
| N. Swing Pivot to Rear Axle Center Line | 42.1 in (1069 mm) |
| P. Bucket Rotation | 180° |
| R. Stabilizer Spread – Operating | 92.0 in (2336 mm) |
| A3. Angle of Departure (per SAE J1234) | 20.6° |
| U. Leveling Angle | 10.6° |
| Swing Arc | 180° |
| Bucket Digging Force | 4548 lbf (20.23 kN) |
| Dipperstick Digging Force | 2698 lbf (12.00 kN) |
| Boom Cylinder, Extend | 3.9 sec |
| Boom Cylinder, Retract | 3.2 sec |
| Swing Cylinder, From 90° | 1.8 sec |
| Dipperstick Cylinder, Extend | 3.7 sec |
| Dipperstick Cylinder, Retract | 2.7 sec |
| Bucket Cylinder, Extend | 2.9 sec |
| Bucket Cylinder, Retract | 1.9 sec |
| Stabilizer Cylinder, Raise | 1.2 sec |
Only 2 remote valves can be installed to the tractor equipped with BH92 backhoe
Designed for superior digging performance, the Kubota BH92 features impressive breakout force and digging depth, making it ideal for trenching, landscaping, and excavation tasks. Its subframe mounting system ensures strength and stability while maintaining operator comfort.
L4701 Implement Limitations
| Implement | Remarks | Specs |
|---|---|---|
| Trailer | Max Load Capacity | 6600 lb (3000 kg) |
| Max Drawbar load | 1430 lb (650 kg) | |
| Rotary Cutter | Max Cutting Width | 72 in (1829 mm) |
| Max Weight | 880 lb (400 kg) | |
| Flail Mower | Max Cutting Width | 60 in (1524 mm) |
| Max Weight | 880 lb (400 kg) | |
| Sickle Bar | Max Cutting Width | 84 in (2133 mm) |
| Max Weight | 1100 lb (500 kg) | |
| Sprayer (Rear mounted) | Max Tank Capacity | 106 gal (400 L) |
| Sprayer (Pull type) | Max Tank Capacity | 317 gal (1200 L) |
| Rotary Tiller | Max Tilling Width | 60 in (1520 mm) |
| Bottom Plow | Max Size | 14 in × 2 |
| Disk Harrow (Pull type) | Max Harrowing Width | 78 in (1981 mm) |
| Max Weight | 880 lb (400 kg) | |
| Chisel Plow | Max Width | 72 in (1829 mm) |
| Max Weight | 770 lb (350 kg) | |
| Broad Caster | Max Tank Capacity | 80 gal (300 L) |
| Max Weight | 220 lb (100 kg) | |
| Manure Spreader | Max Capacity | 4400 lb (2000 kg) |
| Max Width | 84 in (2134 mm) | |
| Cultivator | Number of Rows | 2 |
| Max Weight | 880 lb (400 kg) | |
| Front Blade | Max Cutting Width | 72 in (1829 mm) |
| Max Oil pressure | 2490 psi (17200 kPa) | |
| Sub Frame | Necessary | |
| Rear Blade | Max Cutting Width | 72 in (1829 mm) |
| Max Oil Pressure | 2490 psi (17200 kPa) | |
| Max Lifting Capacity | 1545 lb (700 kg) | |
| Front-end Loader | Max Oil pressure | 2560 psi (18000 kPa) |
| Sub Frame | Necessary | |
| Box Blade | Max Cutting Width | 65 in (1651 mm) |
| Max Weight | 925 lb (420 kg) | |
| Backhoe | Max Digging depth | 90 in (2288 mm) |
| Max Weight | 990 lb (450 kg) | |
| Sub Frame | Necessary | |
| Snow Blade | Max Width | 72 in (1829 mm) |
| Max Weight | 770 lb (350 kg) | |
| Snow Blower | Max Working Width | 66 in (1676 mm) |
| Max Weight | 620 lb (280 kg) |
Combined with a variety of implements such as pallet forks, grapples, augers, mower decks, snow blades, and snowblowers, the Kubota L4701 transforms into a multi-purpose powerhouse, delivering reliable performance across multiple applications.
