Contents
Wheelbase
| Mfwd Axle Ground Clearance With Standard Mfwd Tyres | 19.5 in (495.3 mm) |
| Mfwd | 115.2 in (2926.1 mm) |
Engine Details
| Rated Engine Speed | 2,100 rpm |
| Compression Ratio | 16.0:1 |
| Lubrication | Full-pressure, full-flow filtration with bypass |
| PTO Power | 224 hp (167.1 kw) |
| PTO Torque Rise | 38 % |
| Displacement | 415 cu in (6.9 L) |
| Max Power | 297 hp (221.5 kw) |
| Aspiration | Dual turbochargers, variable geometry turbo with fixed geometry turbo in series |
| Description | John Deere PowerTech PSS 6.8L Engine: B20 Diesel Compatible, in-line, 6-cylinder, wet-sleeve with 4 valves-in-head |
| Oil Filter | Spin-on canister oil filter |
| Power Boost (Available In Transport And/Or Mobile PTO Applications) | 10 % |
| Bore And Stroke | 4.19 in. (106 mm) x 5 in. (127 mm) |
| Filter, Engine Air | Dual stage |
Electrical
| Description | Two batteries in parallel |
| Alternator/Battery | Standard: 200 amps/12 Volt Available: 240 amps/12 Volt |
Fuel System
| Fuel Tank Capacity | PST, G47/48 -475L (125 gal), IVT, G47/48- 520L (137 gal.), PST, G49- 497L (131 gal), IVT, G49-543L (143 gal) |
| Description | Electronically controlled, high-pressure common-rail with electric fuel transfer pump (self priming) |
| Filter Primary | 10 micron replaceable cartridge with water indication sensor and drain |
| Filter Secondary | 2 micron spin-on element |
| Filter System | Two-stage with water separator and service-indicator light |
| DEF Tank Capacity | 6 gal (22.8 L) |
| Required Fuel Type | Ultralow sulfur diesel (B20 diesel compatible) |
PTO (Power Take-Off)
| PTO Speeds @ Engine Rpm | Standard: 15,200 lb. (6,895 kg) 9,208 kg max lift Available: 17,300 lb. (7,847 kg) 1,0206 kg max lift. PTO Speed at engine RPM (1:2 ratio)-1,000 PTO rpm at 1,940E rpm |
Steering
| Hydraulic Power-Steering | Standard: Load Sensing, Hydrostatic, Flow Metering with a 406mm diameter steering wheel |
| Active Command Steering (Acs) | Available: Variable ratio 15:1 to 23:1 (3.1-5.0 turns lock to lock) w/Stability Augmentation and passive tactile feedback-345mm diameter steering wheel HYDRAULIC SYSTEM |
Transmission
| E23 Transmission 50k, 31 Mph (50 Km/H | Available (50 km/h at 2,004 rpm with group 47 tires, 50 km/h at 1,902 rpm with group 48 tires, 50 km/h at 1,804 rpm with group 49 tires) |
| John Deere Infinitely Variable Transmission (Ivt), 26 Mph (40 Km/H | Available |
| John Deere Infinitely Variable Transmission (Ivt), 31 Mph (50 Km/H) | Available |
| E23 Transmission 40k, 26 Mph (40 Km/H) | Standard (40 km/h at 1,683 rpm with group 47 tires, 40 km/h at 1,598 rpm with group 48 tires, 40km/h at 1,515 rpm with group 49 tires) |
Tires
| Rear | Group 47/48/49 tires available as Singles/Duals |
Weights
| Tls | 25738 lb (11674.6 kg) |
Hydraulic
| Maximum Operating Pressure | 2958 psi (20394.7 kPa) |
| Available Flow At Front Scvs | 33 U.S. gpm (126 L/min) |
| Scv Control | 3, 4 Standard, 5 and 6 Available |
Axles
| Diameter | Rear Axle Diameters: 3.94 x 100.4 in. (100 x 2550 mm) diameter Available — 3.94 x 110.5 in. (100 x 2808 mm) diameter Available — 3.94 x 118.5 in. (100 x 3012 mm) diameter Available — 4.33 x 100.4 in. (110 x 2550 mm) diameter — Available 4.33 x 118.5 in. (110 x 3012 mm) diameter — Available 4.72 x 100.4 in. (120 x 2550 mm) diameter — Available 4.72 x 118.5 in. (120 x 3012 mm) diameter |
| 1300 Series Mfwd, Tread Range 60 To 88 In. (1524 To 2235 Mm) | Standard |
| Triple Link Suspension | Front Axle: Triple Link Suspension Plus (TLS), tread range 60 to 88 in. (1524 to 2235 mm) Available Triple Link Suspension Plus (TLS), with front brakes, available with 40 km/h transmissions (standard with 50 km/h transmissions) – Available |
Hydraulic
| Description | Closed-center, pressure and flow compensated |
| Main Pump, Axial Piston (Displacement) | 63 cc standard 85 cc available |
| Rated Flow | Rated flow, 63 cc pump 43 U.S. gpm (162 L/min) Rated flow, 85 cc pump 59 U.S. gpm (223.3 L/min) Available flow at a single rear SCV 35 U.S. gpm (132 L/min |
| Available Flow At A Single Rear Scv | 35 U.S. gpm (132 L/min) |
Final Drive
| Description | Inboard planetary, three pinion |
3-Point Hitch
| Description | Rear- Electrohydraulic sensing, Front- Category 3N, available Premium Front Hitch for use with ground-engaging front implements |
| Lift Capacities – Standard | 11464 lb (5200 kg) |
| Category 3n/3 With Quik-Coupler | Rear- Standard: 15,200 lb. (6,895 kg) 9,208 kg max lift. Standard: 15,200 lb. (6,895 kg) 9,208 kg max lift Available: 17,300 lb. (7,847 kg) 1,0206 kg max lift |
