Contents
Dimensions
| Length With Bucket | 12.11 ft in (3692 mm) |
| Width Over Tires | 5.5 ft in (1676 mm) |
| Ground Clearance | 8.81 in (223.52 mm) |
| Height To Top Of Cab | 6.83 ft in (2083 mm) |
| Wheelbase | 4.07 ft in (1240 mm) |
| Length W/O Bucket | 10.25 ft in (3124 mm) |
| Clearance At Max Lift And Dump | 7.95 ft in (2425 mm) |
| Reach At Max Lift And Dump | 23.6 in (600 mm) |
| Length – Without Bucket | 117.2 in (2976.88 mm) |
| Maximum Dump Angle | 40 degrees |
| Maximum Overall Height | 157.4 in (3997.96 mm) |
| Rack Back Angle – Maximum Height | 85 degrees |
| Reach – Maximum Lift/Dump | 23.6 in (599.45 mm) |
| Maximum Reach – With Arms Parallel | 54.6 in (1386.84 mm) |
| Bucket Pin Height – Carry Position | 7.8 in (198.12 mm) |
| Bucket Pin Height – Maximum Lift | 10.25 ft in (0.27 m) |
| Bumper Overhang – Rear Axle | 42.8 in (1087.12 mm) |
| Clearance At Maximum Lift And Dump | 95.4 in (2423.16 mm) |
| Departure Angle | 26 degrees |
| Height – Top Of Cab | 6.9 ft in (0.18 m) |
| Length – With Bucket On Ground | 145.31 in (3690.62 mm) |
| Turning Radius From Center – Inc Bucket | 94.9 in (2413 mm) |
| Turning Radius From Center – Machine Rear | 58.5 in (1486 mm) |
| Vehicle Width Over Tires | 66 in (1676.4 mm) |
| Wheel Base | 4.07 ft in (0.11 m) |
| Turn Radius From Center – Bucket | 85.3 in (2166.62 mm) |
| Turn Radius From Center – Coupler | 54.6 in (1386.84 mm) |
| Turn Radius From Center – Rear | 68.1 in (1729.74 mm) |
Operating Specifications
| Rated Operating Capacity With Optional Counterweight | 2350 lb (1065.95 kg) |
| Tipping Load | 4300 lb (1950.45 kg) |
| Breakout Force – Tilt Cylinder | 7328 lb (3323.93 kg) |
| Rated Operating Capacity | 2150 lb (975.23 kg) |
Engine Details
| Number Of Cylinders | 4 |
| Engine Make | CAT |
| Engine Model | 3044C DIT |
| Gross Power | 74 hp (55.2 kw) |
| Net Power | 73 hp (54 kw) |
| Power Measured @ | 2500 rpm |
| Displacement | 201 cu in (3.3 L) |
| Bore | 3.7 in (94 mm) |
| Stroke | 4.7 in (119.4 mm) |
| Gross Power – Sae J1995 | 74 hp (55.2 kw) |
| Engine Model | Cat C3.4 DIT |
| Net Power – Sae 1349 | 73 hp (54.5 kw) |
| Net Flywheel Power | 73 hp (54.5 kw) |
Operational Specs
| Operational Weight | 7381 lb (3348 kg) |
| Fuel Tank Capacity | 26 gal (98 L) |
| Cooling System Fluid Capacity | 3.7 gal (14 L) |
| Engine Oil Fluid Capacity | 2.6 gal (10 L) |
| Max Speed | 7.7 mph (12.5 km/h) |
| Hydraulic System Fluid Capacity | 15 gal (57 L) |
| Chain Box Fluid Capacity – Each Side | 2.6 gal (10 L) |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 90 amps |
Power Train
| Travel Speed Forward | 7.7 mph (12.4 km/h) |
| Travel Speed Reverse | 7.7 mph (12.4 km/h) |
| Travel Speed Reverse – 2-Speed Option | 12 mph (19.4 km/h) |
| Travel Speed Forward – 2-Speed Option | 12 mph (19.4 km/h) |
Loader
| Breakout Force | 7328 lb (3324 kg) |
| Operating Load Rating | 2150 lb (975 kg) |
| Tipping Angle | 4300 degrees |
| Bucket Capacity | 0.5 yd3 (0.4 m3) |
Weights
| Operating Weight | 7480 lb (3392.9 kg) |
Hydraulic
| Pump Flow Capacity | 22 gal/min (84 L/min) |
| Relief Valve Pressure | 3335 psi (23000 kPa) |
Hydraulic System
| Hydraulic Flow (1) | Standard |
| Hydraulic Power | 42.8 hp (32 kw) |
| Maximum Loader Hydraulic Flow | 33 gal/min |
| Maximum Loader Hydraulic Pressure | 4061 psi |
| Loader Hydraulic Pressure | 3335 psi |
| Loader Hydraulic Flow | 22 gal/min |
| Hydraulic Flow (2) | High Flow XPS |
Service Refill Capacities
| Cooling System | 3.7 gal (14.1 L) |
| Fuel Tank Capacity | 26 gal (98.5 L) |
| Hydraulic Tank | 11 gal (41.7 L) |
| Engine Crankcase | 2.6 gal (9.9 L) |
| Hydraulic System | 15 gal (56.8 L) |
| Chain Box – Each Side | 2.6 gal (9.9 L) |
Cab
| ROPS | SAE J1040 MAY94, ISO 3471:1994 |
| FOPS | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| FOPS Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |
