Contents
Dimensions
| Front Of Tractor To Front Axle | 115.5 in (2933.7 mm) |
| Ground Clearance – Tractor | 14.4 in (365.76 mm) |
| Height – Overall Shipping | 125.6 in (3190.24 mm) |
| Height – Scraper Blade Maximum | 22.5 in (571.5 mm) |
| Height – Top Of Cab | 10.47 ft in (0.27 m) |
| Length – Overall Machine | 410.2 in (10419.08 mm) |
| Rear Axle – Rear Of Machine | 48.1 in (1221.74 mm) |
| Rim Radius | 25 in (635 mm) |
| Wheel Base | 20.55 ft in (0.53 m) |
| Width – Inside Of Bowl | 86.7 in (2202.18 mm) |
| Width – Outside Rear Tires | 95.7 in (2430.79 mm) |
| Width – Overall Machine | 95.7 in (2430.79 mm) |
| Width – Rear Tire Center Lines | 70.8 in (1798.32 mm) |
| Width – Tractor | 95.7 in (2430.79 mm) |
Tractor Engine
| Net Power | 181 hp (135 kw) |
Engine Details
| Displacement | 403 cu in (6.7 L) |
| Bore | 4 in (100.1 mm) |
| Stroke | 5 in (127 mm) |
| Tractor Engine | Cat C6.6 ATAAC |
| Flywheel Power – Tractor/Scraper | 135 kW (181 hp) |
Transmission
| Reverse | 3.6 mile/h |
Steering
| Width – 180 Degrees Turn | 29.3 ft in (9 m) |
| Steering Angle – Right | 90 degrees |
| Steering Angle – Left | 90 degrees |
| Hydraulic Output | 25.4 gal/min |
Transmission
| 1 Forward | 2.1 mph (3.4 km/h) |
| 2 Forward | 3.5 mph (5.7 km/h) |
| 3 Forward | 5.6 mph (9.1 km/h) |
| 4 Forward | 8.9 mph (14.4 km/h) |
| 5 Forward | 12.8 mph (20.6 km/h) |
| 6 Forward | 24.4 mph (39.3 km/h) |
| Top Speed – Loaded | 24.4 mph (39.3 km/h) |
Steering
| Ground-Driven Secondary Steering System | 4.23 gal/min |
Weights
| Total Operating – Empty | 37229 lb (16886.8 kg) |
| Total Operating – Loaded | 63629 lb (28861.7 kg) |
| Total Shipping | 36653 lb (16625.6 kg) |
| Tractor Shipping | 24434 lb (11083.1 kg) |
| Scraper Shipping | 12219 lb (5542.5 kg) |
| Front Axle | 24641 lb (11177 kg) |
| Rear Axle | 12588 lb (5709.9 kg) |
| Front Axle Weight – Loaded | 33364 lb (15133.7 kg) |
| Rear Axle – Weight – Loaded | 30266 lb (13728.5 kg) |
Elevator
| Number Of Flights | 15 |
| Width – Flight Face | 6.9 in (175.3 mm) |
| Length – Flights | 66.1 in (1679 mm) |
| Spacing Of Flights | 16 in (406.4 mm) |
| Length – Overall | 96 in (2438.4 mm) |
Service Refill Capacities
| Cooling System | 10.2 gal (38.7 L) |
| Fuel Tank Capacity | 95 gal (359.7 L) |
| Crankcase | 5 gal (19 L) |
| Final Drive – Each | 1.5 gal (5.7 L) |
| Transmission | 9.2 gal (34.9 L) |
| Differential | 5 gal (19 L) |
| Hydraulic Reservoir | 33.8 gal (128 L) |
Standards
| Brakes | ISO 3450-1996 |
| ROPS/FOPS | ISO 3471-1994, SAE J1040-MAY 2003; ISO 3449-2005 |
Hydraulics
| Bowl Cylinder Bore | 4 in (101.6 mm) |
| Bowl Cylinder Stroke | 16.5 in (419.1 mm) |
| Floor Cylinder Bore | 5.1 in (129.6 mm) |
| Floor Cylinder Stroke | 24.6 in (624.9 mm) |
| Steering Circuit | 25.4 gal/min |
| Scraper Circuit | 85.3 gal/min |
| Supplemental Steering Circuit | 4.23 gal/min |
| Relief Valve – Steering Circuit | 2756 psi |
| Relief Valve – Implement Circuit | 2502 psi |
| Compensator Settings – Elevator Circuit | 2498 psi |
| Ejector Cylinder Bore | 3.5 in (88.9 mm) |
| Ejector Cylinder Stroke | 36 in (914.4 mm) |
Scraper Bowl
| Hydraulic Penetration Force | 62946 lb (28551.9 kg) |
| Width – Cut – To Router Bits | 95.7 in (2430.8 mm) |
| Rated Load | 26400 lb (11974.9 kg) |
| Capacity – Struck | 8.9 yd3 (6.9 m3) |
| Depth Of Cut – Maximum | 6.3 in (160.1 mm) |
| Ground Clearance – Maximum | 17.7 in (449.6 mm) |
| Cutting Edge Thickness | 0.9 in (22.1 mm) |
| Depth Of Spread – Maximum | 22.5 in (571.5 mm) |
| Scraper Capacity – Heaped | 11 yd3 (8.5 m3) |
