Contents
- Dimensions
- Ripper
- Engine Details
- Frame
- Engine Details
- Frame
- Engine Details
- Frame
- Operational Specs
- Power Train
- Steering
- Transmission
- Front Axle
- Weights
- Hydraulic System
- Moldboard
- Hydraulic System
- Moldboard
- Circle
- Operating Specifications
- Standards
- Service Refill
- Blade Range
- Tandems
- Engine – Tier 2
- Engine – U.S. Epa Tier 4 Interim Certified
Dimensions
| Overall Length | 46.57 ft in (14194 mm) |
| Width Over Tires | 14.04 ft in (4280 mm) |
| Wheelbase | 33.72 ft in (10278 mm) |
| Rear Ground Clearance | 1.66 ft in (507 mm) |
| Tandem Axle Wheelbase | 7.5 ft in (2285 mm) |
| Front Ground Clearance | 2.82 ft in (858 mm) |
| Blade Base | 13.28 ft in (4048 mm) |
| Height To Top Of Isomount Cab | 14.28 ft in (4352 mm) |
| Length – Between Tandem Axles | 90 in (2286 mm) |
| Length – Counterweight To Ripper | 633.9 in (16101.06 mm) |
| Length – Front Axle To Mid Tandem | 404.6 in (10276.84 mm) |
| Length – Front Axle To Moldboard | 159.4 in (4048.76 mm) |
| Length – Front Tire To Rear Of Machine | 558.8 in (14193.52 mm) |
| Height – Top Of Cylinders | 151.4 in (3845.56 mm) |
| Height – Top Of Cab | 14.61 ft in (0.38 m) |
| Height – Front Axle Center | 33.8 in (858.52 mm) |
| Height – Exhaust Stack | 170.2 in (4323.08 mm) |
| Width – Outside Front Tires | 168.5 in (4279.9 mm) |
| Width – Outside Rear Tires | 166.3 in (4224.03 mm) |
| Width – Tire Center Lines | 135.81 in (3449.32 mm) |
| Ground Clearance – Rear Axle | 23.9 in (607.06 mm) |
Ripper
| Pry-Out Force | 41052 lb (18620.9 kg) |
| Ripping Depth – Maximum | 17.9 in (454.7 mm) |
| Ripper Shank Holders | 7 |
| Penetration Force | 29985 lb (13601 kg) |
| Shank Holder Spacing – Minimum | 23.4 in (594.4 mm) |
| Shank Holder Spacing – Maximum | 23.8 in (604.6 mm) |
Engine Details
| Number Of Cylinders | 6 |
| Net Power Gear 4-6 | 533 hp (397.5 kw) |
| Engine Make | CAT |
| Engine Model | C18 ACERT |
| Net Power Gear 1-2 | 533 hp (397.5 kw) |
| Power Measured @ | 2000 rpm |
| Net Power Gear 5-6 | 533 hp (397.5 kw) |
| Max Power | 533 hp (397.5 kw) |
| Net Power Gears 7-8 | 533 hp (397.5 kw) |
| Net Torque Gears 7-8 | 1762 lb ft (2389 Nm) |
| Displacement | 1104.5 cu in (18.1 L) |
| Bore | 5.7 in (144.8 mm) |
| Stroke | 7.2 in (182.9 mm) |
| Engine Model | Cat C18 ACERT |
| Derating Altitude | 5500 ft in (1676.4 m) |
| Maximum Torque | 1762 lb ft (2389 Nm) |
| Base Power (1st Gear) – Net | 533 hp (397.5 kw) |
| Speed At Rated Power | 1800 RPM |
Frame
| Circle – Diameter | 103.6 in (2631.5 mm) |
| Drawbar – Height | 8.5 in (215.9 mm) |
| Front Axle – Height To Center | 32.2 in (817.9 mm) |
| Circle – Blade Beam Thickness | 6.3 in (160.1 mm) |
| Front Axle – Total Oscillation Per Side | 32 degrees |
| Drawbar – Thickness | 0.6 in (15.3 mm) |
| Drawbar – Width | 8.9 in (226.1 mm) |
| Front-Top/Bottom Plate – Width | 20.2 in (513.1 mm) |
| Front-Top/Bottom Plate – Thickness | 2 in (50.8 mm) |
| Front Axle – Wheel Lean – Left/Right | 18 degrees |
Engine Details
| Base Power (All Gears) – Net | 533 hp (397.5 kw) |
| Standard – Fan Speed – Maximum | 1300 RPM |
| Standard – Fan Speed – Minimum | 60 RPM |
| Standard – Ambient Capability | 122 degrees |
Frame
| Front-Side Plates – Width | 16.3 in (414.1 mm) |
| Front-Side Plates – Thickness | 1 in (25.4 mm) |
Engine Details
| Base Power (All Gears) – Net – Metric | 540 hp (402.7 kw) |
Frame
| Height – Front Axle Center | 33.8 in (858.6 mm) |
Operational Specs
| Std Operation Weight – Front Axle | 41360 lb (18761 kg) |
| Std Operation Weight – Rear Axle | 96332 lb (43695 kg) |
| Hydraulic System Fluid Capacity | 70 gal (264 L) |
| Std Operation Weight – Total | 137692 lb (62456 kg) |
| Max Operation Weight – Front Axle | 43931 lb (19927 kg) |
| Max Operation Weight – Rear Axle | 101877 lb (46211 kg) |
| Max Operation Weight – Total | 145808 lb (66138 kg) |
| Fuel Tank Capacity | 350 gal (1326 L) |
| Cooling System Fluid Capacity | 24 gal (90 L) |
| Rear Diff/Final Drive Fluid Capacity | 49 gal (184 L) |
| Circle Gearbox Fluid Capacity | 2.3 gal (8.5 L) |
| Tandem Case Fluid Capacity (Each) | 85 gal (322 L) |
| Tire Size | 29.5-29 28PR |
Power Train
| Brakes – Parking | Spring applied, hydraulically released |
| Brakes – Service | Oil-actuated, oil-disc |
| Transmission | Automatic, electronic power shift |
| Forward/Reverse Gears | 6 Forward/3 Reverse |
| Brakes – Secondary | Oil-actuated, oil-disc |
| Brakes – Service – Surface Area | 15733 in2 (10.2 m2) |
Steering
| Articulation Angle | 25 degrees |
| Turning Radius | 40.7 ft in (12.4 m) |
Transmission
| Transmission Type | automatic, electronic power shift |
| Number Of Gears – Forward | 6 |
| Number Of Gears – Reverse | 3 |
| Max Speed – Forward | 26.7 mph (43 km/h) |
| Max Speed – Reverse | 25.6 mph (41.2 km/h) |
Front Axle
| Wheel Lean | 18 degrees |
| Oscillation – Total | 32 degrees |
| Ground Clearance | 2.9 ft in (858 mm) |
Weights
| Gross Vehicle Weight – Typically Equipped – Rear Axle | 102051 lb (46289.6 kg) |
| Gross Vehicle Weight – Typically Equipped – Front Axle | 43100 lb (19549.9 kg) |
| Gross Vehicle Weight – Typically Equipped – Total | 145151 lb (65839.4 kg) |
| Operating Weight – Typically Equipped | 145151 lb (65839.4 kg) |
| Gross Vehicle Weight – Base – Total | 138287 lb (62726 kg) |
| Gross Vehicle Weight – Typically Equipped | 145151 lb (65839.4 kg) |
| Gross Vehicle Weight – Maximum – Total | 152857 lb (69334.8 kg) |
| Gross Vehicle Weight – Base – Rear Axle | 96110 lb (43594.8 kg) |
| Gross Vehicle Weight – Base – Front Axle | 42177 lb (19131.2 kg) |
| Gross Vehicle Weight – Maximum – Front Axle | 45856 lb (20800 kg) |
| Gross Vehicle Weight – Maximum – Rear Axle | 107001 lb (48534.9 kg) |
Hydraulic System
| Standby Pressure | 450 psi |
| Maximum System Pressure | 3500 psi |
Moldboard
| Moldboard Width | 24 ft in (7315 mm) |
| Moldboard Height | 42 in (1067 mm) |
| Moldboard Thickness | 2 in (50 mm) |
| Max Depth Of Cut | 25.9 in (657 mm) |
| Side Shift Left | 34.3 in (870 mm) |
| Side Shift Right | 49 in (1244 mm) |
Hydraulic System
| Pump Type | Variable piston |
| Pump Flow | 145 gal/min (550 L/min) |
| Relief Valve Pressure | 3500 psi (24150 kPa) |
| Circuit Type | Electro-hydraulic load sensing, closed center |
| Pump Output | 145 gal/min |
Moldboard
| Blade Width | 24 ft in (7.4 m) |
| Arc Radius | 21.7 in (551.2 mm) |
| Throat Clearance | 6.4 in (162.6 mm) |
| Thickness | 2 in (50.8 mm) |
| Cutting Edge Width | 13 in (330.2 mm) |
| Cutting Edge Thickness | 1.1 in (28 mm) |
| End Bit – Width | 8 in (203.2 mm) |
| End Bit – Thickness | 1 in (25.4 mm) |
| Moldboard – Height | 42 in (1066.8 mm) |
| Moldboard – Thickness | 2 in (50.8 mm) |
| Blade Pull – Base | 86500 lb (39235.8 kg) |
| Blade Pull – Maximum | 95940 lb (43517.7 kg) |
| Down Pressure – Base | 69583 lb (31562.4 kg) |
| Down Pressure – Maximum | 75654 lb (34316.1 kg) |
| Width | 24 ft in (7.4 m) |
| Height | 40 in (1016 mm) |
Circle
| Diameter | 103.6 in (2631 mm) |
| Shift Left | 31.7 in (804 mm) |
| Shift Right | 17.2 in (437 mm) |
| Max Reach Outside Tires – Left | 126.9 in (3222 mm) |
| Max Reach Outside Tires – Right | 127.7 in (3228 mm) |
| Max Lift Above Ground | 25 in (634 mm) |
| Blade Tip Angle – Front | 40 degrees |
| Blade Tip Angle – Rear | None degrees (0 degrees) |
Operating Specifications
| Top Speed – Forward | 27 mph (43.5 km/h) |
| Top Speed – Reverse | 25.8 mph (41.6 km/h) |
| Turning Radius – Outside Front Tires | 40.7 ft in (12.4 m) |
| Steering Range – Left/Right | 47.5 degrees |
| Articulation Angle – Left/Right | 25 degrees |
| Forward – 6th | 26.7 mph (43 km/h) |
| Forward – 5th | 17.2 mph (27.7 km/h) |
| Forward – 4th | 9.3 mph (15 km/h) |
| Forward – 3rd | 6 mph (9.7 km/h) |
| Forward – 2nd | 3.5 mph (5.7 km/h) |
| Forward – 1st | 2.3 mph (3.8 km/h) |
| Reverse – 3rd | 25.6 mph (41.2 km/h) |
| Reverse – 2nd | 8.9 mph (14.4 km/h) |
| Reverse – 1st | 3.4 mph (5.5 km/h) |
| Forward – 1f | 2.3 mph (3.8 km/h) |
| Forward – 2f | 3.6 mph (5.8 km/h) |
| Forward – 3f | 6 mph (9.7 km/h) |
| Forward – 4f | 9.4 mph (15.2 km/h) |
| Forward – 5f | 17.4 mph (28.1 km/h) |
| Forward – 6f | 27 mph (43.5 km/h) |
| Reverse – 1r | 3.4 mph (5.5 km/h) |
| Reverse – 2r | 9 mph (14.5 km/h) |
| Reverse – 3r | 25.8 mph (41.6 km/h) |
Standards
| Brakes | ISO 3450 |
| ROPS/FOPS | ISO 3471/ISO 3449 |
| Sound | ISO 6394/ISO 6395 |
| Steering | ISO 5010 |
Service Refill
| Cooling System | 24 gal (90.9 L) |
| Hydraulic System – Total | 70 gal (265 L) |
| Engine Oil | 16 gal (60.6 L) |
| Hydraulic System – Tank | 36 gal (136.3 L) |
| Tandem Housing – Each | 85 gal (321.8 L) |
| Circle Drive Housing | 2 gal (7.6 L) |
| Front Wheel Spindle Bearing Housing | 1 gal (3.8 L) |
| Fuel Tank Capacity | 350 gal (1324.9 L) |
| Transmission – Differential – Final Drives | 49 gal (185.5 L) |
| Differential – Final Drives | 49 gal (185.5 L) |
| Circle Drive Housing – Each | 2 gal (7.6 L) |
| Transmission Oil | 23 gal (87.1 L) |
Blade Range
| Circle Centershift – Right | 210.2 in (5339.1 mm) |
| Circle Centershift – Left | 209.9 in (5331.5 mm) |
| Moldboard Sideshift – Right | 193 in (4902.2 mm) |
| Moldboard Sideshift – Left | 178.3 in (4528.9 mm) |
| Blade Tip Range – Forward | 40 degrees |
| Blade Tip Range – Backward | 0 degrees |
| Maximum Shoulder Reach Outside Of Tires – Right | 127.1 in (3228.4 mm) |
| Maximum Shoulder Reach Outside Of Tires – Left | 126.9 in (3223.3 mm) |
| Maximum Lift Above Ground | 25 in (635 mm) |
| Maximum Depth Of Cut | 25.9 in (657.9 mm) |
| Maximum Blade Position Angle | 35 degrees |
Tandems
| Height | 41 in (1041.4 mm) |
| Width | 13.9 in (353.1 mm) |
| Sidewall Thickness – Inner | 1 in (25.4 mm) |
| Sidewall Thickness – Outer | 1.2 in (30.5 mm) |
| Drive Chain Pitch | 3 in (76.2 mm) |
| Wheel Axle Spacing | 90 in (2286 mm) |
| Tandem Oscillation – Front Up | 20 degrees |
| Tandem Oscillation – Front Down | 20 degrees |
Engine – Tier 2
| Base Power (All Gears) – Net | 533 hp (397.5 kw) |
| Base Power (All Gears) – Net – Metric | 540 hp (402.7 kw) |
| Engine Model | Cat C18 ACERT |
| Displacement | 1104.5 cu in (18.1 L) |
| Bore | 5.7 in (144.8 mm) |
| Stroke | 7.2 in (182.9 mm) |
| Maximum Torque – Net | 2001 lb ft (2713 Nm) |
| Torque Rise – Net | 30 % |
| Speed At Rated Power | 1800 rpm |
| Number Of Cylinders | 6 |
| Derating Altitude | 10000 ft in (3048 m) |
| Standard – Fan Speed – Maximum | 1325 rpm |
| Standard – Fan Speed – Minimum | 60 rpm |
| Standard – Ambient Capability | 122 degrees |
Engine – U.S. Epa Tier 4 Interim Certified
| Base Power (All Gears) – Net | 533 hp (397.5 kw) |
| Base Power (All Gears) – Net – Metric | 540 hp (402.7 kw) |
| Engine Model | Cat C18 ACERT |
| Displacement | 1104.5 cu in (18.1 L) |
| Bore | 5.7 in (144.8 mm) |
| Stroke | 7.2 in (182.9 mm) |
| Speed At Rated Power | 1800 rpm |
| Number Of Cylinders | 6 |
| Derating Altitude | 9655 ft in (2942.9 m) |
| Standard – Fan Speed – Maximum | 1325 rpm |
| Standard – Fan Speed – Minimum | 60 rpm |
| Standard – Ambient Capability | 122 degrees |
| Maximum Torque – Net | 2001 lb ft (2713 Nm) |
