Dimensions
| Overall Length |
28.58 ft in (8713 mm) |
| Width Over Tires |
8.39 ft in (2553 mm) |
| Wheelbase |
20.24 ft in (6169 mm) |
| Rear Ground Clearance |
1.13 ft in (344 mm) |
| Tandem Axle Wheelbase |
5 ft in (1523 mm) |
| Front Ground Clearance |
1.96 ft in (600 mm) |
| Blade Base |
8.4 ft in (2561 mm) |
| Height To Top Of Isomount Cab |
10.25 ft in (3131 mm) |
Engine Details
| Number Of Cylinders |
6 |
| Engine Make |
CAT |
| Engine Model |
CAT 3306 |
| Displacement |
638 cu in (10.45 L) |
| Gross Power |
186 hp (139 kw) |
| Gross Power (VHP) |
206 hp (154 kw) |
| Net Power |
165 hp (123 kw) |
| Net Power (VHP) |
185 hp (138 kw) |
| Power Measured @ |
1900 rpm |
| Peak Torque |
593 lb ft (804 Nm) |
| Peak Torque (VHP) |
665 lb ft (904 Nm) |
| Torque Measured @ |
1200 rpm |
| Torque rise |
30% |
| Aspiration |
Turbocharged |
Cat VHP (variable horsepower) available in gears 4-8 forward and 3-6 reverse when All-Wheel Drive (AWD) is not engaged. When AWD is engaged, VHP is available in all gears
Transmission
| Transmission Type |
direct drive, power shift |
| Number Of Gears – Forward |
8 |
| Number Of Gears – Reverse |
6 |
| Max Speed – Forward |
27.4 mph (44 km/h) |
| Max Speed – Reverse |
21.6 mph (34.7 km/h) |
Front Axle
| Wheel Lean |
18 degrees |
| Oscillation – Total |
32 degrees |
| Ground Clearance |
2 ft in (600 mm) |
Steering
| Articulation Angle |
20 degrees |
| Turning Radius |
24.6 ft in (7.5 m) |
Moldboard
| Moldboard Width |
12 ft in (3658 mm) |
| Moldboard Height |
24 in (610 mm) |
| Moldboard Thickness |
0.9 in (22 mm) |
| Max Depth Of Cut |
28.1 in (715 mm) |
| Side Shift Left |
20.6 in (524 mm) |
| Side Shift Right |
26 in (660 mm) |
| Blade Pull At Max Weight |
43977 lb (19931 kg) |
| Blade Down Pressure |
30126 lb (13665 kg) |
Circle
| Diameter |
60.2 in (1530 mm) |
| Shift Left |
27.4 in (695 mm) |
| Shift Right |
28.7 in (728 mm) |
| Max Reach Outside Tires – Left |
74.6 in (1896 mm) |
| Max Reach Outside Tires – Right |
77.9 in (1978 mm) |
| Max Lift Above Ground |
18.9 in (480 mm) |
| Blade Tip Angle – Front |
40 degrees |
| Blade Tip Angle – Rear |
5 degrees |
Hydraulic System
| Pump Type |
Axial piston |
| Pump Flow |
54.4 gal/min (206 L/min) |
| Relief Valve Pressure |
3500 psi (24150 kPa) |
Weight
| Std Operation Weight – Total |
33670 lb (15270 kg) |
| Std Operation Weight – Front Axle |
9493 lb (4305 kg) |
| Std Operation Weight – Rear Axle |
24177 lb (10965 kg) |
| Max Operation Weight – Total |
48863 lb (22146 kg) |
| Max Operation Weight – Front Axle |
17443 lb (7906 kg) |
| Max Operation Weight – Rear Axle |
31420 lb (14240 kg) |
Service Refill Capacities
| Fuel Tank Capacity |
105 gal (397 L) |
| Hydraulic System Fluid Capacity |
20.8 gal (80 L) |
| Cooling System Fluid Capacity |
10 gal (38 L) |
| Circle Gearbox Fluid Capacity |
1.8 gal (7 L) |
| Tandem Case Fluid Capacity (Each) |
16.9 gal (64 L) |
