Contents
Working Range
| Shipping Length Of Unit | 14.07 ft in (4287 mm) |
| Max Cutting Height | 14.61 ft in (4453 mm) |
| Shipping Height Of Unit | 8.11 ft in (2470 mm) |
| Max Loading Height | 10.52 ft in (3205 mm) |
| Max Reach Along Ground | 16.08 ft in (4901 mm) |
| Max Vertical Wall Digging Depth | 5.72 ft in (1741 mm) |
| Max Digging Depth | 9.17 ft in (2794 mm) |
| Boom/Arm Length | 1300 mm dipper |
| Maximum Digging Depth – Dozer Down | 10.24 ft in (3119 mm) |
| Maximum Digging Depth – Dozer Up | 9.17 ft in (2794 mm) |
| Maximum Height To Dipper Nose Pivot Pin | 12.5 ft in (3808 mm) |
| Maximum Vertical Wallcut Depth | 5.72 ft in (1741 mm) |
| Minimum Front Swing Radius (Fully Offset) | 6.6 ft in (2010 mm) |
| Minimum Front Swing Radius (No Offset) | 7.06 ft in (2150 mm) |
Dimensions
| Length Of Track On Ground | 5.24 ft in (1597 mm) |
| Ground Clearance | 0.89 ft in (270 mm) |
| Height To Top Of Cab | 7.99 ft in (2435 mm) |
| Tail Swing Radius | 2.63 ft in (800 mm) |
| Track Gauge | 4.44 ft in (1352 mm) |
| Overall Width Of Superstructure | 5.42 ft in (1650 mm) |
| Width Over Tracks | 5.42 ft in (1652 mm) |
| Cab Height | 59.73 in (1517 mm) |
| Transport Length, Minimum | 14064.97 ft in (4287 m) |
| Transport Height- Minimum | 7988.85 ft in (2435 m) |
Undercarriage
| Shoe Size | 11.82 in (300 mm) |
| Track Tension | Grease |
| Number Of Track Rollers Per Side | 4 |
| Max Travel Speed | 2.68 mph (4.3 km/h) |
| Ground Pressure | 4.7 psi (32.41 kPa) |
| Tractive Effort | 60.19 lb (27.3 kg) |
Engine Details
| Fuel | Diesel |
| Starter Motor | 2 KW |
| Engine Model | 403-15 |
| Gross Power | 28 hp (20.9 kw) |
| Net Power | 26.8 hp (20 kw) |
| Power Measured @ | 2200 rpm |
| Displacement | 91.3 cu in (1.5 L) |
| Max Torque | 70.8 lb ft (96 Nm) |
| Torque Measured @ | 1600 rpm |
| Alternator | 65 amps |
Operational Specs
| Operating Weight | 7092 lb (3217 kg) |
| Fuel Tank Capacity | 10.6 gal (40 L) |
| Cooling System Fluid Capacity | 2.3 gal (8.5 L) |
| Hydraulic System Fluid Capacity | 18.5 gal (70 L) |
| Engine Oil Capacity | 1.2 gal (4.5 L) |
| Operational Voltage | 12 V |
| Alternator Supplied Amperage | 55 amps |
| Hydraulic System Relief Valve Pressure | 3191 psi (22001.2 kPa) |
| Hydraulic Pump Flow Capacity | 26.9 gal/min (101.9 L/min) |
Performance
| Travel Speed Low | 1.5 mph (2.4 km/h) |
| Travel Speed – High | 2.7 mph (4.3 km/h) |
| Gradeability | 36 % |
Swing Mechanism
| Swing Speed | 9.6 rpm |
Blade
| Approach Angle | 24.5 degrees |
Hydraulic System
| Nominal Output | 27 gal/min (102 L/min) |
Blade
| Maximum Height | 1.3 ft in (370 mm) |
Hydraulic System
| Slew Main Relief | 190 bar |
| Excavator/Track Main Relief | 245 bar |
Blade
| Dig Depth (Below Ground) | 2.1 ft in (622 mm) |
| Reach In Front Of Tracks | 2.3 ft in (681 mm) |
Hydraulic System
| Hydraulic Motor (Travel) | Piston |
| Auxiliary Hydraulic Flow | 15.4 gal/min (58 L/min) |
Blade
| Blade Width | 1650 |
Hydraulic System
| Pump Type | 2 Variable & 1 Gear |
Blade
| Height | 13.2 in (335 mm) |
Boom
| Boom Swing Left | 45 degrees |
| Boom Swing Right | 45 degrees |
| Bucket Rotation | 186 degrees |
| Dipper Rotation | 119 degrees |
| Bucket Tearout | 6294.7 lb (28 kN) |
| Dipper Tearout | 3821.8 lb (17 kN) |
| Slew Speed | 9.6 rpm |
