Contents
Dimensions
| Width Over Tracks | 6.5 ft in (1981 mm) |
| Height To Top Of Cab | 6.95 ft in (2117 mm) |
| Ground Clearance | 9.1 in (231.14 mm) |
| Clearance At Max Lift And Dump | 8.06 ft in (2456 mm) |
| Reach At Max Lift And Dump | 2.57 ft in (781 mm) |
| Departure Angle | 44 degrees |
| Dump Angle | 50 degrees |
| Height – Top Of Cab | 6.95 ft in (0.18 m) |
| Bucket Hinge Pin | 127.52 in (3239 mm) |
| Bucket Pin Height – Carry Position | 7.7 in (195.58 mm) |
| Bucket Pin Height – Maximum Lift | 10.63 ft in (0.27 m) |
| Bucket Pin Reach – Maximum Lift | 14.6 in (370.84 mm) |
| Clearance At Maximum Lift And Dump | 96.7 in (2456.18 mm) |
| Turn Radius From Center – Coupler | 57.4 in (1457.96 mm) |
| Turn Radius From Center – Rear | 69.41 in (1762.76 mm) |
| Turning Radius From Center – Machine Rear | 69.38 in (1762 mm) |
| Vehicle Width | 78 in (1981.2 mm) |
| Length – Track On Ground | 64 in (1625.6 mm) |
| Length – With Bucket On Ground | 144.81 in (3677.92 mm) |
| Length – Without Bucket | 116.5 in (2959.1 mm) |
| Length With Bucket | 12.08 ft in (3679 mm) |
| Length With Out Bucket | 9.72 ft in (2960 mm) |
| Maximum Dump Angle | 50 degrees |
| Maximum Overall Height | 160.7 in (4081.78 mm) |
| Maximum Reach – With Arms Parallel | 50.5 in (1282.7 mm) |
| Overall Height | 13.39 ft in (4081 mm) |
| Overall Length – Track | 83.8 in (2128.52 mm) |
| Overall Track Length | 6.99 ft in (2129 mm) |
| Rack Back Angle – Maximum Height | 85 degrees |
| Reach At Maximum Lift/Dump | 30.7 in (779.78 mm) |
| Turn Radius From Center – Bucket | 88.1 in (2237.74 mm) |
Undercarriage
| Length Of Track On Ground | 5.34 ft in (1625 mm) |
| Ground Pressure | 4.49 psi (30.9 kPa) |
| Counterweight, Standard | 125.67 lb (57 kg) |
| Ground Contact Area | 2309.51 in2 (1.49 m2) |
Engine Details
| Engine Make | Caterpillar |
| Engine Model | C3.4 DIT |
| Gross Power | 74 hp (55.2 kw) |
| Net Power | 73 hp (54.5 kw) |
| Displacement | 201 cu in (3.3 L) |
| Bore | 3.7 in (94 mm) |
| Stroke | 4.7 in (119.4 mm) |
| Gross Power – Sae J1995 | 74 hp (55.2 kw) |
| Engine Model | Cat C3.4T |
| Net Power – Sae 1349 | 73 hp (54.5 kw) |
Operational Specs
| Operating Weight | 10333 lb (4687 kg) |
| Cooling System Fluid Capacity | 3.7 gal (14 L) |
| Fuel Tank Capacity | 25.9 gal (98 L) |
| Hydraulic System Fluid Capacity | 15.1 gal (57 L) |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 90 amps |
| Travel Speed | 8.5 mph (13.6 km/h) |
Power Train
| Travel Speed Forward – 2-Speed | 8.5 mph (13.7 km/h) |
| Travel Speed Reverse – 2-Speed | 8.5 mph (13.7 km/h) |
| Travel Speed Forward | 5 mph (8.1 km/h) |
| Travel Speed Reverse | 5 mph (8.1 km/h) |
Loader
| Operating Capacity (Iso 14397) | 3650.9 lb (1656 kg) |
| Breakout Force | 7308 lb (3315 kg) |
| Tipping Load | 7299.6 lb (3311 kg) |
Weights
| Operating Weight | 10332 lb (4686.6 kg) |
Hydraulic
| Pump Type | Standard |
| Pump Flow | 22.2 gal/min (84 L/min) |
| Relief Valve Pressure | 3335.9 psi (23000 kPa) |
Hydraulic System
| Hydraulic Flow (1) | Standard |
| Hydraulic Power | 42.8 hp (32 kw) |
| Maximum Loader Hydraulic Flow | 33 gal/min |
| Maximum Loader Hydraulic Pressure | 4061 psi |
| Loader Hydraulic Pressure | 3335 psi |
| Loader Hydraulic Flow | 22 gal/min |
| Hydraulic Flow (2) | High Flow XPS |
Operating Specifications
| Rated Operating Capacities – 50% Tipping Load | 3650 lb (1655.7 kg) |
| Rated Operating Capacities – 35% Tipping Load | 2555 lb (1159 kg) |
| Ground Contact Area | 2303 in2 (1.5 m2) |
| Ground Pressure | 4.5 psi |
| Tipping Load | 7300 lb (3311.3 kg) |
| Breakout Force – Tilt Cylinder | 7308 lb (3314.9 kg) |
Service Refill Capacities
| Cooling System | 3.7 gal (14.1 L) |
| Fuel Tank Capacity | 26 gal (98.5 L) |
| Hydraulic Tank | 11 gal (41.7 L) |
| Engine Crankcase | 2.6 gal (9.9 L) |
| Hydraulic System | 15 gal (56.8 L) |
Cab
| ROPS | SAE J1040 MAY94, ISO 3471:1994 |
| FOPS | SAE J1043 SEPT87, ISO 3449:1992 Level I |
| FOPS Level Ii | SAE J231 JAN81, ISO 3449:1992 Level II |
