Case 1825B Skid Steer Loader

Contents

Dimensions
Engine Details
Operational Specs
Loader
Hydraulic

Dimensions

Width Over Tires	3.25 ft in (990 mm)
Ground Clearance	6.7 in (170 mm)
Wheelbase	2.79 ft in (850 mm)
Length W/O Bucket	9.09 ft in (2770 mm)
Hinge Pin Height – Fully Raised	98.04 in (2490 mm)
Height To Top Of ROPS	70.08 in (1780 mm)
Angle Of Departure	31 degrees

Engine Details

Number Of Cylinders	4
Engine Make	Kubota
Engine Model	V1505
Gross Power	30 hp (22.4 kw)
Net Power	27 hp (20.2 kw)
Power Measured @	2400 rpm
Max Torque	67.2 lb ft (91 Nm)
Torque Measured @	2100 rpm
Displacement	91.6 cu in (1.5 L)
Bore	3.1 in (78 mm)
Stroke	3.1 in (78.4 mm)

Operational Specs

Operational Weight	3106 lb (1409 kg)
Fuel Tank Capacity	8.6 gal (32.2 L)
Engine Oil Fluid Capacity	1.7 gal (6.3 L)
Hydraulic System Fluid Capacity	5.8 gal (21.8 L)
Max Speed	5.8 mph (9.2 km/h)
Chain Box Fluid Capacity – Each Side	0.8 gal (2.8 L)
Tire Size	5.70 x 15, 4PR
Operating Voltage	12 V
Alternator Supplied Amperage	30 amps

Loader

Operating Load Rating	884 lb (401 kg)
Bucket Width	48.9 in (1240 mm)

Hydraulic

Pump Type	Gear pump driven directl
Pump Flow Capacity	9.6 gal/min (36.3 L/min)
Relief Valve Pressure	2300 psi (15858 kPa)
Raise Time	4.1 sec
Dump Time	1.2 sec
Lower Time	2.5 sec

Ask a question