Contents
Dump
| Rated Payload | 58422.43 lb (26499.98 kg) |
Engine Details
| Displacement | 567 cu in (9.3 L) |
| Bore | 4.6 in (115.1 mm) |
| Stroke | 5.9 in (149.1 mm) |
| Emissions | The reference to Tier 4 Final/Stage IV includes US EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards. |
| Net Power – Sae J1349 | 314 hp (234.2 kw) |
| Gross Power – Sae J1995 | 320 hp (238.7 kw) |
| Engine Model | Cat C9.3 ACERT |
| Net Power – Iso 14396 | 316 hp (235.7 kw) |
| Note (1) | The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard. |
| Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
| Note (3) | Net power when the fan is at maximum speed is 214 kW (287 hp) per the SAE reference conditions. |
| Note (4) | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. |
| Peak Engine Torque Gross (Sae J1995) | 1275 lb ft (1728.7 Nm) |
| Peak Engine Torque Speed | 1200 rpm |
| Engine Model – U.S. Epa Tier 4 Final/Eu Stage Iv | Cat C9.3 ACERT |
| Peak Engine Torque Net (Sae J1349) | 1262 lb ft (1711.1 Nm) |
| No Engine De-Rating Below | 7500 ft in (2286 m) |
Transmission
| Forward – 1 | 5 mph (8.1 km/h) |
| Forward – 2 | 9 mph (14.5 km/h) |
| Forward – 3 | 14 mph (22.6 km/h) |
| Forward – 4 | 21 mph (33.8 km/h) |
| Forward – 5 | 29 mph (46.7 km/h) |
| Forward – 6 | 36 mph (58 km/h) |
| Reverse – 1 | 6 mph (9.7 km/h) |
Steering
| Lock To Lock | 4.75 seconds @ 60 rpm |
Service Refill Capacities
| Cooling System | 21.9 gal (83 L) |
| Fuel Tank Capacity | 108.8 gal (411.9 L) |
| Def Tank | 5.3 gal (20.1 L) |
| Engine Crankcase | 10 gal (37.9 L) |
| Transmission | 12.4 gal (47 L) |
| Hydraulic System | 29.1 gal (110.2 L) |
| Final Drives/Differential | 33 gal (125 L) |
| Output Transfer Gear Box | 6.3 gal (23.9 L) |
Standards
| Cab – FOPS | ISO 3449 Level II 2005 |
| Cab – ROPS | ISO 3471 2008 |
| Brakes | ISO 3450 2011 |
| Steering | ISO 5010 2007 |
Operating Weights
| Front Axle – Empty | 31835 lb (14440.2 kg) |
| Center Axle – Empty | 9755 lb (4424.8 kg) |
| Rear Axle – Empty | 9205 lb (4175.4 kg) |
| Total – Empty | 50795 lb (23040.3 kg) |
| Front Axle – Rated Load | 5512 lb (2500.3 kg) |
| Center Axle – Rated Load | 23700 lb (10750.2 kg) |
| Rear Axle – Rated Load | 23700 lb (10750.2 kg) |
| Total – Rated Load | 52912 lb (24000.5 kg) |
| Front Axle – Loaded | 37374 lb (16952.6 kg) |
| Center Axle – Loaded | 33455 lb (15175 kg) |
| Rear Axle – Loaded | 32905 lb (14925.5 kg) |
| Total – Loaded | 103707 lb (47040.8 kg) |
Sound Levels
| Interior Cab | 76 dB(A) |
| Note (1) | The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed. |
| Note (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
Turning Circle
| Note | Dimensions are for machines equipped with 23.5R25 tires. |
| Turning Dimensions – Sae Turning Radius | 294 in (7467.6 mm) |
| Turning Dimensions – Clearance Radius | 318 in (8077.2 mm) |
| Turning Dimensions – Inside Radius | 153 in (3886.2 mm) |
| Turning Dimensions – Aisle Width | 210 in (5334 mm) |
Body Capacities
| Heaped (Sae 2:1) | 19.6 yd3 (15 m3) |
| Struck | 14.4 yd3 (11.1 m3) |
| Tailgate Struck | 14.5 yd3 (11.1 m3) |
| Tailgate Heaped Sae 2:1 | 20.4 yd3 (15.6 m3) |
Body Hoist
| Raise Time | 10 s |
| Lower Time | 8 s |
Body Plate
| Body Plate Type | High strength Brinell HB450 wear resistant steel |
